A metal plate with a model and serial number is attached to every Graco pump and sprayer. Having this information is essential if you need to locate a handbook or purchase parts for your sprayer. Even though the machine inside the shroud can differ significantly, Graco offers their paint sprayers under names that are the same or quite similar to each other.
Graco switched to a new format in or around 2020, which combines all of this data into a lengthy string of letters and numbers that begins with the model, batch, and serial number.
Sprayers & Parts from Graco
You can depend on Graco sprayers to tackle any task when you require paint and finish sprayers. Paint, sealants, and other materials can be applied with perfect texture and smoothness with Graco sprayers. We provide a variety of:
- Graco equipment and sprayers
- Parts for Graco sprayers
- Diagrams for Graco parts
KEY THINGS TO REMEMBER WHEN SELECTING NEW PARTS FOR YOUR AIRLESS SPRAY PAINTING EQUIPMENT
Whether or whether the replacement parts for airless spray painting are authentic OEM components is one of the most crucial factors to take into account. A sizable “knock-off” parts market has emerged as a result of the protective coatings industry’s high replacement part consumption. These “knock-off” products are notably subpar overall. These parts have a limited lifespan, poor performance, a failure to meet engineering standards, a higher risk of damage, etc. These parts don’t save you money, therefore buying and using them is a false economy.
WHY USE REPLACEMENT PARTS FOR AIRLESS SPRAY PAINTING EQUIPMENT?
Spray painting equipment is exposed to a lot of abuse, including handling that is rough, solvent, and abrasive material attacks and hostile environments. As a result, spare part replacement is ongoing. Furthermore, a lot of airless spray painting equipment is made to be adjustable to fit a variety of jobs. For instance, airless spray guns can be customized with various spray tips and filters to accommodate various coatings. Because of this, it’s critical to have a field stock of replacement components that is continuously refilled.
COMMON PROBLEMS WITH REPLACEMENT PARTS FOR AIRLESS SPRAY PAINTING EQUIPMENT
Recognizing Graco homeowner sprayer parts items is the main problem. If worn components are used continuously, there is a danger of injury, equipment failure, and quality failure. Several signs of wear in traditional spray equipment consist of…
- The spray pattern is getting wider and shorter. – A worn-out spray tip
- A sprayer without air won’t prime. worn-out cylinder, piston rod, and/or packings
- Fluid seeping from the piston’s top – Worn packings and/or piston rod
METHODS FOR USING A SPRAYER TO PAINT
The operation handbook and all safety precautions for your sprayer should be reviewed before you begin painting. Using an airless paint sprayer is very easy. Make sure you shield anything you don’t want to spray and adequately prepare the surfaces you’ll be spraying. If you adhere to the following advice, you should have no trouble utilizing a paint sprayer effectively.
Inspect your sprayer
It is important to always be aware of the type of sprayer you are using and the sizes of spray tips it can accommodate before choosing one. Which size tips work best depends on the pressure-volume that varies between sprayers. Consult the sprayer manual for more details. The biggest tip that a sprayer can support is often indicated by its model number.
Rapid Counseling
Employ a lower tip size when using thinner substances like enamels and dyes.
If the substance is thicker, such as exterior latex or oil-based paints, use bigger sizes.
Faster material exits the gun when the tip hole is larger.
Compared to 311 or 411 tips, a 313 tip sprays more quickly.
Important Graco Sprayer Parts
- The 1-inch Fine Mesh Inlet Strainer for Pick up and Coarse Mesh Inlet Strainer One-inch suction tube Tube Xtreme Extension to Fit Graco King Use Suits 55-Gallon Drum Xtreme Pump Suction Kit The coarse mesh of the Pick Up Tube Inlet Strainer prevents any garbage from getting into the pump.
- Graco is the manufacturer of genuine parts that are sold individually and are made of stainless steel.
- Outfits The Pick-Up Tube Inlet Strainer features a coarse and fine mesh double layer to prevent any debris from getting into the pump.
- Graco is the manufacturer of genuine parts that are sold individually and are made of stainless steel.
- Suits Standard 1″ Graco Pick-up tubes for 55-gallon drums
- Screws onto the bottom of a standard pick-up tube to make it longer.
- Includes the 1″ diameter extension and the coupling to make the connection
- Sold as a kit with 2 components
- Genuine Parts – Manufactured by Graco
Conclusion
A variety of replacement parts for airless spray, including filter screens, ball valves, lower repair kits, inlet strainers, and more. Please contact our friendly and committed customer care team with any questions you may have.
