A Comprehensive Guide To Change Till Roll In Card Machine

Home - Business - A Comprehensive Guide To Change Till Roll In Card Machine

Replacing the till roll in your card machine may seem to be a difficult operation, but once you understand the procedures, it is really fairly straightforward. Indeed, keeping your card machine ready to accept transactions is imperative for any company. Whether you utilise a SumUp or a Clover card machine, this guide will aid you through the process of quickly replacing the till roll. 

Understanding how to take care of your card machine is critical for efficient company operations. Regular upkeep involves understanding how to modify the till roll to alleviate interruptions in transactions. Let’s go over the simple measures to make sure your card machine is always ready to serve your consumers.

Step-by-Step Guide to Changing the Till Roll

Step 1: Determine the kind of card machine.

The first step is to determine whatever sort of card machine you’re using. Remember, different machines use somewhat distinct approaches to change the till roll. Here, we’ll look at two prominent types: the Sumup card machine and the Clover card machine. Knowing your machine kind will allow you to follow the proper method. 

SumUp_Solo_terminals_image_Discount_Till_Rolls.jpeg

Step 2: Prepare the New Till Roll

Confirm that you have the appropriate size and kind of till roll for your card machine. It is imperative to note that most card machines utilise thermal paper rolls. So, Keeping a few extra rolls on hand will help you avoid any difficulty. If you are unclear about the parameters of the till roll, go to your machine’s handbook.

Step 3: Open the Paper Compartment

Locate the paper chamber in your card machine. This is normally around the rear or bottom. A Sumup card machine may include a latch or a button that releases the compartment. In the case of a Clover card machine, look for a hinged lid that is easy to raise.

Step 4: Remove the Used Till Roll.

Carefully remove the used till roll. If there is any residual paper, discard it entirely to prevent clogs. This step guarantees that the fresh roll moves smoothly through the machine. Dispose of the used rolls correctly.

Step 5: Insert the New Till Roll.

Place the new till roll in the compartment where the paper feeds from the bottom. This setting guarantees that the thermal print head prints accurately on the paper. Make certain that the paper passes appropriately through the rollers on both the Sumup and Clover card machines.

Step 6: Run the paper through the printer.

Pull the end of the fresh till roll and insert it into the printer slot. Then close the chamber tightly, making sure the paper extends outside of the machine. Turn on your card machine and do a test print in order to verify that the paper is feeding properly.

Specific Instructions for SumUp Card Machine

If you’re utilising a Sumup card machine, take these steps to change the till roll:

  1. To open the paper container, push the lock at the rear.
  2. Remove the used roll and any leftover paper.
  3. Insert the fresh till roll, paper feeding from the bottom.
  4. Close the chamber and make sure the paper stretches out.
  5. Turn on the machine and do a test print.

Specific Instructions for Clover Card Machine

If you’re utilising a Sumup card machine, take these steps to change the till roll:

  1. To open the paper container, push the lock at the rear.
  2. Remove the used roll and any leftover paper.
  3. Insert the fresh till roll, paper feeding from the bottom.
  4. Close the chamber and make sure the paper stretches out.
  5. Turn on the machine and do a test print.

Endnotes

Changing the till roll on your card machine is a simple yet necessary activity to keep your company operating properly. Whether you utilise a SumUp or a Clover card machine, following the proper protocol will guarantee that your clients get continuous service.

Discount Till Rolls

Table of Contents

Recent Articles